A LIFT GARAGE DOOR (214) 831-2545 Book Online
Newly installed white ribbed sectional door seen from inside a steel building, its galvanised struts, torsion spring, cable drums and red emergency release cord all visible against the metal wall.

Aledo, Parker County

Commercial Garage Door in Aledo, TX

Commercial doors eat springs because they cycle forty times a day instead of six. A standard 10,000 cycle spring on a busy Aledo dock is gone in under a year. High cycle springs cost more once and less every year after that. We will price both.

  • Emergency and same-day repairs
  • 5.0 from 10 reviews
  • Upfront pricing, no hidden fees
  • Free estimates

Sectional versus rolling steel

A commercial sectional is a heavier version of a house door. Hinged panels, rollers in track, torsion springs on a shaft over the opening. A rolling steel door is a different animal. Interlocking slats coil around a barrel above the opening and the springs live inside that barrel. No track over your head, which is why they work in buildings where the space above the door is used for something. Working on the counterbalance means going inside the barrel. Different tooling, different job.

Cycle count is the number that matters

One cycle is one open and one close. Standard springs are built for around 10,000. High cycle sets run 25,000, 50,000, even 100,000. A door at a busy dock runs thirty to fifty cycles a day. That is 10,000 in eight to twelve months. So you either replace springs every year with the downtime that comes with it, or you spec the springs to the duty and stop thinking about it. We will tell you which one your door is.

Commercial operators are not big house openers

A house opener is a trolley on a rail sized for light, occasional use. Commercial doors run jackshaft operators mounted on the wall beside the shaft, hoist operators with a chain fallback so you can move the door in a power outage, or heavy duty trolley units built for constant use. Control is usually a three button open, close, stop station instead of a remote. Sometimes there are loop detectors, pull cords, or buttons at more than one spot. The control setting that matters most is whether the door closes on a single press or only while somebody holds the button. That choice depends on what moves through the opening.

Commercial Garage Door for Aledo homes

A small town core surrounded by large new master-planned communities, so recent three-car attached garages sit beside long-standing ranch properties with detached equipment barns.

We cover ZIP code 76008.

Regular calls come from Walsh, Morningstar and Parks of Aledo.

Anywhere around Aledo City Hall is a short run for us.

Aledo sits in Parker County with a population of about 6,655.

What you are probably seeing

  • Door binds partway up and somebody has to help it finish.
  • Rolling curtain coils crooked and one edge runs ahead of the other.
  • Operator hums or trips the breaker instead of moving the door.
  • You are replacing springs on the same opening every year.
  • Bent slats or a bent end stile from a forklift or a trailer.

Aledo service

Call (214) 831-2545 or request a visit.

The visit

How a Aledo call runs

  1. Walk the opening

    Door type, size, weight, counterbalance setup, operator type, control scheme, and how many cycles a day it runs. That last number is the one that tells us whether the current hardware was ever right for the job.

  2. Split the problem three ways

    Door, counterbalance, operator. Each gets tested on its own. The door moves manually where that is safe, the counterbalance gets checked for whether it still holds the curtain at rest, and the operator gets checked for control, limit and motor faults.

  3. Scope, price, downtime window

    You get the repair scope, the parts lead time, and an honest downtime window in writing. If the work can be staged so the opening stays usable in between, we say so.

  4. Do the work on your schedule

    Before open, after close, or whenever hurts least. Counterbalance work happens with the door secured and the springs unwound in order before anything loaded comes apart.

  5. Cycle it and write it down

    Door gets run under the operator, limits and safeties verified, and you get a record of what went in, the cycle rating of any springs, and the service interval we would run on that opening.

On the job

Commercial Garage Door in the field

Questions

Commercial Garage Door in Aledo

Can you come after hours?

Yes, and for most commercial openings that is the right call. Give us the window and the access arrangement. Scheduled after hours work is something you plan around. A door failing mid shift is not.

The door works but it is slow and loud. Can it wait?

It can wait, but it is telling you something. Slow and loud usually means the counterbalance is losing tension, the bearings are dry, or the door is running out of line in the guides. All three are cheaper now than after it stops. Put it on the schedule instead of waiting for the emergency.

Do you install new commercial doors?

Yes. Door type, gauge, insulation, counterbalance cycle rating, operator class and control scheme all get picked for what the opening actually does. A door bought on price alone almost never matches the duty it ends up doing.

What about our fire rated doors?

Rated assemblies have inspection and drop test obligations under NFPA 80 and the results have to be documented. That is not the same as a maintenance visit. Check the label on the door or the guide to find out which of your openings are rated.

Can a bent slat be straightened?

Sometimes, and it is a temporary fix. Bent steel has yielded and it will not sit flat again. On a low use door that might be fine. On a door that runs all day, it comes back.

Talk to a technician now

Commercial Garage Door in Aledo and across Parker County.

Call Now Book